Home Technologies Electromechanical Group Electromechanical - Industrial Electromechanical – Industrial Support Forum AC30 LINKnet DSElite

Electromechanical - Industrial

Electromechanical – Industrial Support Forum AC30 LINKnet DSElite

Electromechanical - Industrial requires membership for participation - click to join

Print Friendly and PDF

AC30 LINKnet DSElite

By Binh Ngo over 1 year ago

Dear ALL,

I have connected to the AC30 inverter by DSELite, but I can't find the PROFIBUS option in DSElite.

Could you help me?

Thanks.

Top Replies

William Chin, Employee 11 months ago +1 suggested

Binh, The AC30 with LinkNET uses the DSE version of the firmware. This version of the firmware does not have support for Profibus. Profibus is an option for the Codesys version of the firmware. See page...

Parents

0 William Chin, Employee 11 months ago

Binh,

The AC30 with LinkNET uses the DSE version of the firmware. This version of the firmware does not have support for Profibus. Profibus is an option for the Codesys version of the firmware. See page 9 of the AC30 brochure AC30VPD Catalog HA473413.pdf (parker.com)

Here is our knowledgebase on how to change the firmware. How can the AC30 be programmed, and how to change the firmware between Codesys & LINKnet? - Electromechanical Knowledge Base - Electromechanical Group - Parker Community.

One you change the firmware, you can not use DSELite and will have to us PDQ to configure the AC30 and PDD to program the drive with Codesys.

PDQ and PDD can be found here https://divapps.parker.com/divapps/eme/EME/downloads/EME_Software.htm

Regards,

William
Cancel
Up +1 Down

Reply

Verify Answer

Reject Answer

Cancel

Reply

0 William Chin, Employee 11 months ago

Binh,

The AC30 with LinkNET uses the DSE version of the firmware. This version of the firmware does not have support for Profibus. Profibus is an option for the Codesys version of the firmware. See page 9 of the AC30 brochure AC30VPD Catalog HA473413.pdf (parker.com)

Here is our knowledgebase on how to change the firmware. How can the AC30 be programmed, and how to change the firmware between Codesys & LINKnet? - Electromechanical Knowledge Base - Electromechanical Group - Parker Community.

One you change the firmware, you can not use DSELite and will have to us PDQ to configure the AC30 and PDD to program the drive with Codesys.

PDQ and PDD can be found here https://divapps.parker.com/divapps/eme/EME/downloads/EME_Software.htm

Regards,

William
Cancel
Up +1 Down

Reply

Verify Answer

Reject Answer

Cancel

Children

No Data