Here are the steps required to make a proper back up for a 6000 series controller.
1.Upload the programs from the working unit.
2. Go to the terminal Emulator. Issue the following commands and make note of the responses from the controller. If the controller is busy running a program, it will be necessary to insert an â€œ! â€œ before each command (example: !SCALE).
3.Open up the uploaded file. I t should look something like this:
4.Insert the four scaling commands above the first line of the uploaded code. It should look something like this:
Please note that this example is for a single axis controller. These are example values and you should use values that you uploaded from the old controller
5. After the last END statement, insert the STARTP command. The last line of the uploaded code should be END It should look something like this:
Now save this file. You have successfully created a back up file for your controller.