Follow Parker Hannifin on social media:
I have driver HID8SS
I have a problem passing phasing procedure . The encoder is incremental 2000ppr. The encoder is connected to port x7(Pin A+,A-,B+,B-,GND,Vee ,Shield).
When set to (Incremental encoder in frequency/direction) the encoder reads correctly. I have 2000 pulses for one rev , but I can not pass the phasing procedure.
When set to ( Incremental encoder in square wave ) the encoder reads wrong I have 8000 pulses or more for one rev, but the phase procedure passes it successfully.
Thank you for your interest in Parker Electromechanical products. The Hi-Drive is a European Electromechnical product and currently they are not monitoring this forum yet. The best way to reach them would be to email their technical support team firstname.lastname@example.org.