Follow Parker Hannifin on social media:
i Have motor Parvex HD950EKR6300 and controlled by DSM16032. several week ago i found that this DSM16032 is obsolete.
what is the replacement for this Digivex Single Motion DSM16032 for my Motor HD950EK?
i need the replacement for spare part, in case my controller is broken.
The replacement for the HD series servo motors would be the NX series servo motors. As for the DSM drive the replacement would probably be Compax3 Drive. Below are links to their product pages. I would recommend reaching out to your local Parker representative as they would be able to more accurately spec part numbers for your application after a potential site visit. I can assist in finding the proper local support if you could provide your location.
Thank you very much for your reply.
is HD Series Motor totaly obsolete and change to NX Series? because when i read the characteristic for HX Series is for Very High Dynamic Charcteristic and NX Series is for High Dynamic Charcteristic.
Existing motor HD950EK Torque (Mo) is 70 NM and the biggest one from NX Series is 64 NM
its somekind of different range type beetwen HX and NX Series.
My Location is in Indonesia.
the HX and HD motors are to different families. The HX is described as Low Inertia Servomotor and the HD is described as a Medium Inertia Servomotor. Both have been replaced by the NX line of motors, therefore the NX series might not encompass the whole range of products that the HX and HD did. I would recommend reaching out to you local Parker Branch, I have copied their information below.
Parker Hannifin Singapore Pte Ltd 11th Fourth Chin Bee Road Singapore 619702 Phone: +65 68876300