Home Parker Community Technologies Electromechanical Group Electromechanical Support Forum Motor and Servo control in HMI express
  • State Not Answered
  • Date
    Chester Hale
  • Date 4 Dec 2018 8:15 PM
  • Replies 1 reply
  • Subscribers 3 subscribers
  • Views 715 views
  • Users 0 members are here
Related
Print Friendly and PDF

Motor and Servo control in HMI express

Chester Hale
By  8 months ago

I will be putting a machine together in which I will use a PAC for control.  I will have 5 AC10 drives and 5 as yet undefined servo controllers.  I plan to use the WebVis capability of the PAC and a wireless access point on the machine to allow use of a tablet as the machine HMI.  I am hoping to find premade screens that would represent the standard operator controls of the drives.  Is there a library somewhere or a user forum where there is access to something like this.  I don't mind creating my own but would rather borrow from the work others have already done.

Thanks!

  • 0 , Employee 8 months ago

    Chester,

    Currently we do not have any pre-made standard operator controls screens because the visualization is usually an area that integrator want to give a custom look to.  In some of our PAC examples that publish in our knowledge base here, there will be some visualizations included.

    Feel free to contact our Applications Department, by phone 1-800-238-9070 or by email emn_support@parker.com, and we can talk about PAC and AC10 connectivity and the 5 servo drives that you need.

Parker - Engineering Your Success
© Parker Hannifin Corp 2019