Products: P Series Drives, PD-xxP, PD-xxC, MPP/MPJ, BE, SM servo motors
P Series Servo Drives can be configured for use with standard Parker motors such as the BE, SM and MPP/MPJ families. Incremental encoders are supported beginning with Firmware version 0.81.
Factory designed cables are available. Part number F-4A1-xx
Motor Configuration Files
Motor Configuration with Parker MPP/BE/SM/J/N servo motors, mSR Linear Motor stages, LXR series linear motor stages, IForce and Ripped linear motor/motor stages:
How to..........quick instructions for loading motor files with Drive Support Tool
Existing Parker feedback cables can modified with the addition of the drive side connector.
Connector kits for the drive feedback connector are available for purchase:
APC-CN3NNA Drive Feedback Connector, 14-pin
|PS Feedback||P Drive|
Above wiring requires the drive to be configured for
Encoder Type= Quad. B leads A
Hall Offset = 330 degrees
24-Sep-2019 jh Rev3 motor files added