What software and communication cable are used for programming?

Daniel Cliffe — Fri, 02 Oct 2020 15:44:56 GMT

Current Revision posted to Electromechanical Knowledge Base by Daniel Cliffe on 10/2/2020 3:44:56 PM

Cables

Both of these cables can be purchased through your local Parker Distributor or Integrator. See the following sections to determine what cable is required to communicate to your drive.

CM351909 has, on one end, an "RJ" connector that connects into the drive. The other end terminates into an RS232 connector via a provided RJ to Serial converter.
- If your computer/laptop does not have a serial port you will need to supply your own USB-to-Serial adapter. We recommend FTDI chip based adapters. Prolific chipsets will not work.

CM471050 is a MiniUSB cable.
- It can be used to program LINKnet techboxes and communicate to an 890 drive

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

Software for Standalone Drives

To program standalone drives (non-networked drives, non LINK drives, non LINKnet drives) you will use DSELite. If you are using an AC30 out of the box, you will need PDQ. Both can be downloaded from the following link at no charge:

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

You can also "purchase" DSELite with part number DSE-LITE.
- The price for software + the cables under this part number is the same as buying the cables by itself (the software is still free, provided in the bundle).
- The cables that comes with "DSE-LITE" are the CM351909 cable.

590, 590+, 650, 650V, 650G or 690+:
- You will need the CM351909 programming cable
- 590+ Connect/Install/Extract with DSELite
- 690+ Connect/Install/Extract with DSELite
- 590C or 590D Connect/Install/Extract with DSELite [For 590+ product migration]

AC890
- You will need a MiniUSB cable. Parker offers part number CM471050.
- 890 Connect/Install/Extract with DSELite
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below. Please Read.
AC10
- You will need a USB-RS485 Serial converter or the dedicated 1002-00-00 module.
  - The dedicated 1002-00-00 module for the AC10 is recommended. Can be purchased from a local distributor/integrator
    - AC10 using the dedicated 1002-00-00 module with DSELite
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885
    - AC10 using a generic RS485 device with DSELite

Software for LINKnet Systems, or Firewire Systems

To program LINKnet techboxes, or AC890 drives networked together via Firewire you will need to use DSE (also know as DSE890) software. This can be purchased through a local distributor using either part number:

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
- All Diagnostic & Maintenance Functions
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects
- All diagnostic & Maintenance Functions, Create new Projects &/or add Modules

You will need a MiniUSB cable to program a LINKnet techbox initially. Parker offers part number CM471050 which can be used. You will be able to program through the Ethernet port via a Cat 6 shielded cable per the LINKnet manual across the network (ie. through a switch), once the techbox is initially programmed with an IP address via USB.

Firewire is programmed through the 890 drive itself.

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or the much more advanced PDD (Parker Drive Development). To use DSELite you must flash the firmware.

You will not be able to use Profibus option in DSELite. If you are using Profibus, you require PDQ or PDD.

For the PDQ software you will likely use, see the link at the top of this FAQ page for download.
- Used out of the box for all AC30 drives
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
- Ensure your IP address on the PC has the same subnet as the base AC30.
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive.
- If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install AC30 Firmware.

TS8000 HMIs

To program the TS8000 HMIs you will need to download either DSI3 or DSI8000 from the below link. To connect to the HMI you will have to use either the USB (with Type B connector) or the RS232 Prog port.

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects
DSI3 is used with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and used for version 2 projects.

Legacy Software for LINK Systems

You must already have a copy of the project file to program a LINK system (you will not be able to upload/download from a Techbox without a copy of the project already in-hand). To program a LINK system you will need to use the DSD software. This software can be purchased through a local distributor using either part number DSD-DEV or DSD-RUN.

The CM351909 cable is also used to communicate with a LINK Techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions, Create new Projects &/or add Modules
What is DSD and LINK

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

02OCT2020 DCLIFFE -- Removed recommended adapter list.

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Fri, 01 May 2020 20:34:07 GMT

Revision 39 posted to Electromechanical Knowledge Base by Jack DeGrano on 5/1/2020 8:34:07 PM

Cables

Both of these cables can be purchased through your local Parker Distributor or Integrator. See the following sections to determine what cable is required to communicate to your drive.

CM351909 has, on one end, an "RJ" connector that connects into the drive. The other end terminates into an RS232 connector via a provided RJ to Serial converter.
- If your computer/laptop does not have a serial port you will need to supply your own USB-to-Serial adapter. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chipsets will not work.
- ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)

CM471050 is a MiniUSB cable.
- It can be used to program LINKnet techboxes and communicate to an 890 drive

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

Software for Standalone Drives

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

You can also "purchase" DSELite with part number DSE-LITE.
- The price for software + the cables under this part number is the same as buying the cables by itself (the software is still free, provided in the bundle).
- The cables that comes with "DSE-LITE" are the CM351909 cable.

590, 590+, 650, 650V, 650G or 690+:
- You will need the CM351909 programming cable
- 590+ Connect/Install/Extract with DSELite
- 690+ Connect/Install/Extract with DSELite
- 590C or 590D Connect/Install/Extract with DSELite [For 590+ product migration]

AC890
- You will need a MiniUSB cable. Parker offers part number CM471050.
- 890 Connect/Install/Extract with DSELite
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below. Please Read.
AC10
- You will need a USB-RS485 Serial converter or the dedicated 1002-00-00 module.
  - The dedicated 1002-00-00 module for the AC10 is recommended. Can be purchased from a local distributor/integrator
    - AC10 using the dedicated 1002-00-00 module with DSELite
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885
    - AC10 using a generic RS485 device with DSELite

Software for LINKnet Systems, or Firewire Systems

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
- All Diagnostic & Maintenance Functions
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects
- All diagnostic & Maintenance Functions, Create new Projects &/or add Modules

Firewire is programmed through the 890 drive itself.

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or the much more advanced PDD (Parker Drive Development). To use DSELite you must flash the firmware.

You will not be able to use Profibus option in DSELite. If you are using Profibus, you require PDQ or PDD.

For the PDQ software you will likely use, see the link at the top of this FAQ page for download.
- Used out of the box for all AC30 drives
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
- Ensure your IP address on the PC has the same subnet as the base AC30.
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive.
- If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install AC30 Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects
DSI3 is used with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and used for version 2 projects.

Legacy Software for LINK Systems

You must already have a copy of the project file to program a LINK system (you will not be able to upload/download from a techbox without a copy of the project already in-hand). To program a LINK system you will need to use the DSD software. This software can be purchased through a local distributor using either part number DSD-DEV or DSD-RUN.

The CM351909 cable is also used to communicate with a LINK techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions, Create new Projects &/or add Modules
What is DSD and LINK

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Fri, 01 May 2020 20:32:30 GMT

Revision 38 posted to Electromechanical Knowledge Base by Jack DeGrano on 5/1/2020 8:32:30 PM

Cables

Both of these cables can be purchased through your local Parker Distributor or Integrator. See the following sections to determine what cable is required to communicate to your drive.

CM351909 has, on one end, an "RJ" connector that connects into the drive. The other end terminates into an RS232 connector via a provided RJ to Serial converter.
- If your computer/laptop does not have a serial port you will need to supply your own USB-to-Serial adapter. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chipsets will not work.
- ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)

CM471050 is a MiniUSB cable.
- It can be used to program LINKnet techboxes and communicate to an 890 drive

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

Software for Standalone Drives

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

You can also "purchase" DSELite with part number DSE-LITE.
- The price for software + the cables under this part number is the same as buying the cables by itself (the software is still free, provided in the bundle).
- The cables that comes with "DSE-LITE" are the CM351909 cable.

590, 590+, 650, 650V, 650G or 690+:
- You will need the CM351909 programming cable
- 590+ Connect/Install/Extract with DSELite
- 690+ Connect/Install/Extract with DSELite
- 590C or 590D Connect/Install/Extract with DSELite [For 590+ product migration]

AC890
- You will need a MiniUSB cable. Parker offers part number CM471050.
- 890 Connect/Install/Extract with DSELite
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below. Please Read.
AC10
- You will need a USB-RS485 Serial converter or the dedicated 1002-00-00 module.
  - The dedicated 1002-00-00 module for the AC10 is recommended. Can be purchased from a local distributor/integrator
    - AC10 using the dedicated 1002-00-00 module with DSELite
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885
    - AC10 using a generic RS485 device with DSELite

Software for LINKnet Systems, or Firewire Systems

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
- All Diagnostic & Maintenance Functions
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects
- All diagnostic & Maintenance Functions, Create new Projects &/or add Modules

Firewire is programmed through the 890 drive itself.

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or the much more advanced PDD (Parker Drive Development). To use DSELite you must flash the firmware.

You will not be able to use Profibus option in DSELite. If you are using Profibus, you require PDQ or PDD.

For the PDQ software you will likely use, see the link at the top of this FAQ page for download.
- Used out of the box for all AC30 drives
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
- Ensure your IP address on the PC has the same subnet as the base AC30.
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive.
- If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install AC30 Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects
DSI3 is used with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and used for version 2 projects.

Legacy Software for LINK Systems

The CM351909 cable is also used to communicate with a LINK techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions, Create new Projects &/or add Modules
What is DSD and LINK

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Fri, 01 May 2020 20:31:18 GMT

Revision 37 posted to Electromechanical Knowledge Base by Jack DeGrano on 5/1/2020 8:31:18 PM

Cables

Both of these cables can be purchased through your local Parker Distributor or Integrator. See the following sections to determine what cable is required to communicate to your drive.

CM351909 has, on one end, an "RJ" connector that connects into the drive. The other end terminates into an RS232 connector via a provided RJ to Serial converter.
- If your computer/laptop does not have a serial port you will need to supply your own USB-to-Serial adapter. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chipsets will not work.
- ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)

CM471050 is a MiniUSB cable.
- It can be used to program LINKnet techboxes and communicate to an 890 drive

Software for Standalone Drives

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

You can also "purchase" DSELite with part number DSE-LITE.
- The price for software + the cables under this part number is the same as buying the cables by itself (the software is still free, provided in the bundle).
- The cables that comes with "DSE-LITE" are the CM351909 cable.

590, 590+, 650, 650V, 650G or 690+:
- You will need the CM351909 programming cable
- 590+ Connect/Install/Extract with DSELite
- 690+ Connect/Install/Extract with DSELite
- 590C or 590D Connect/Install/Extract with DSELite [For 590+ product migration]

AC890
- You will need a MiniUSB cable. Parker offers part number CM471050.
- 890 Connect/Install/Extract with DSELite
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below. Please Read.
AC10
- You will need a USB-RS485 Serial converter or the dedicated 1002-00-00 module.
  - The dedicated 1002-00-00 module for the AC10 is recommended. Can be purchased from a local distributor/integrator
    - AC10 using the dedicated 1002-00-00 module with DSELite
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885
    - AC10 using a generic RS485 device with DSELite

Software for LINKnet Systems, or Firewire Systems

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
- All Diagnostic & Maintenance Functions
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects
- All diagnostic & Maintenance Functions, Create new Projects &/or add Modules

Firewire is programmed through the 890 drive itself.

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or the much more advanced PDD (Parker Drive Development). To use DSELite you must flash the firmware.

You will not be able to use Profibus option in DSELite. If you are using Profibus, you require PDQ or PDD.

For the PDQ software you will likely use, see the link at the top of this FAQ page for download.
- Used out of the box for all AC30 drives
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
- Ensure your IP address on the PC has the same subnet as the base AC30.
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive.
- If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install AC30 Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects
DSI3 is used with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and used for version 2 projects.

Legacy Software for LINK Systems

The CM351909 cable is also used to communicate with a LINK techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions, Create new Projects &/or add Modules
What is DSD and LINK

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Fri, 01 May 2020 20:29:49 GMT

Revision 36 posted to Electromechanical Knowledge Base by Jack DeGrano on 5/1/2020 8:29:49 PM

Cables

Both of these cables can be purchased through your local Parker Distributor or Integrator. See the following sections to determine what cable is required to communicate to your drive.

CM351909 has, on one end, an "RJ" connector that connects into the drive. The other end terminates into an RS232 connector via a provided RJ to Serial converter.
- If your computer/laptop does not have a serial port you will need to supply your own USB-to-Serial adapter. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chipsets will not work.
- ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)

CM471050 is a MiniUSB cable.
- It can be used to program LINKnet techboxes and communicate to an 890 drive

Standalone Drives

To program standalone drives (non-networked drives, non LINK drives, non LINKnet drives) you will use DSELite. If you are using an AC30 out of the box, you will need PDQ. Both can be downloaded from the following link at no charge:

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

You can also "purchase" DSELite with part number DSE-LITE.
- The price for software + the cables under this part number is the same as buying the cables by itself (the software is still free, provided in the bundle).
- The cables that comes with "DSE-LITE" are the CM351909 cable.

590, 590+, 650, 650V, 650G or 690+:
- You will need the CM351909 programming cable
- 590+ Connect/Install/Extract with DSELite
- 690+ Connect/Install/Extract with DSELite
- 590C or 590D Connect/Install/Extract with DSELite [For 590+ product migration]

AC890
- You will need a MiniUSB cable. Parker offers part number CM471050.
- 890 Connect/Install/Extract with DSELite
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below. Please Read.
AC10
- You will need a USB-RS485 Serial converter or the dedicated 1002-00-00 module.
  - The dedicated 1002-00-00 module for the AC10 is recommended. Can be purchased from a local distributor/integrator
    - AC10 using the dedicated 1002-00-00 module with DSELite
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885
    - AC10 using a generic RS485 device with DSELite

LINKnet Systems or Firewire Systems

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
- All Diagnostic & Maintenance Functions
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects
- All diagnostic & Maintenance Functions, Create new Projects &/or add Modules

Firewire is programmed through the 890 drive itself.

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or the much more advanced PDD (Parker Drive Development). To use DSELite you must flash the firmware.

You will not be able to use Profibus option in DSELite. If you are using Profibus, you require PDQ or PDD.

For the PDQ software you will likely use, see the link at the top of this FAQ page for download.
- Used out of the box for all AC30 drives
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
- Ensure your IP address on the PC has the same subnet as the base AC30.
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive.
- If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install AC30 Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects
DSI3 is used with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and used for version 2 projects.

LINK Systems

The CM351909 cable is also used to communicate with a LINK techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions, Create new Projects &/or add Modules
What is DSD and LINK

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Fri, 01 May 2020 20:29:36 GMT

Revision 35 posted to Electromechanical Knowledge Base by Jack DeGrano on 5/1/2020 8:29:36 PM

Cables

Both of these cables can be purchased through your local Parker Distributor or Integrator. See the following sections to determine what cable is required to communicate to your drive.

CM351909 has, on one end, an "RJ" connector that connects into the drive. The other end terminates into an RS232 connector via a provided RJ to Serial converter.
- If your computer/laptop does not have a serial port you will need to supply your own USB-to-Serial adapter. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chipsets will not work.
- ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)

CM471050 is a MiniUSB cable.
- It can be used to program LINKnet techboxes and communicate to an 890 drive

Standalone Drives

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

You can also "purchase" DSELite with part number DSE-LITE.
- The price for software + the cables under this part number is the same as buying the cables by itself (the software is still free, provided in the bundle).
- The cables that comes with "DSE-LITE" are the CM351909 cable.

590, 590+, 650, 650V, 650G or 690+:
- You will need the CM351909 programming cable
- 590+ Connect/Install/Extract with DSELite
- 690+ Connect/Install/Extract with DSELite
- 590C or 590D Connect/Install/Extract with DSELite [For 590+ product migration]

AC890
- You will need a MiniUSB cable. Parker offers part number CM471050.
- 890 Connect/Install/Extract with DSELite
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below. Please Read.
AC10
- You will need a USB-RS485 Serial converter or the dedicated 1002-00-00 module.
  - The dedicated 1002-00-00 module for the AC10 is recommended. Can be purchased from a local distributor/integrator
    - AC10 using the dedicated 1002-00-00 module with DSELite
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885
    - AC10 using a generic RS485 device with DSELite

LINKnet Systems or Firewire Systems

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
- All Diagnostic & Maintenance Functions
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects
- All diagnostic & Maintenance Functions, Create new Projects &/or add Modules

Firewire is programmed through the 890 drive itself.

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or the much more advanced PDD (Parker Drive Development). To use DSELite you must flash the firmware.

You will not be able to use Profibus option in DSELite. If you are using Profibus, you require PDQ or PDD.

For the PDQ software you will likely use, see the link at the top of this FAQ page for download.
- Used out of the box for all AC30 drives
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
- Ensure your IP address on the PC has the same subnet as the base AC30.
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive.
- If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install AC30 Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects
DSI3 is used with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and used for version 2 projects.

LINK Systems

The CM351909 cable is also used to communicate with a LINK techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions, Create new Projects &/or add Modules
What is DSD and LINK

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Fri, 01 May 2020 20:28:59 GMT

Revision 34 posted to Electromechanical Knowledge Base by Jack DeGrano on 5/1/2020 8:28:59 PM

Cables

Both of these cables can be purchased through your local Parker Distributor or Integrator. See the following sections to determine what cable is required to communicate to your drive.

CM351909 has, on one end, an "RJ" connector that connects into the drive. The other end terminates into an RS232 connector via a provided RJ to Serial converter.
- If your computer/laptop does not have a serial port you will need to supply your own USB-to-Serial adapter. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chipsets will not work.
- ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)

CM471050 is a MiniUSB cable.
- It can be used to program LINKnet techboxes and communicate to an 890 drive

Standalone Drives

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

You can also "purchase" DSELite with part number DSE-LITE.
- The price for software + the cables under this part number is the same as buying the cables by itself (the software is still free, provided in the bundle).
- The cables that comes with "DSE-LITE" are the CM351909 cable.

590, 590+, 650, 650V, 650G or 690+:
- You will need the CM351909 programming cable
- 590+ Connect/Install/Extract with DSELite
- 690+ Connect/Install/Extract with DSELite
- 590C or 590D Connect/Install/Extract with DSELite [For 590+ product migration]

AC890
- You will need a MiniUSB cable. Parker offers part number CM471050.
- 890 Connect/Install/Extract with DSELite
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below. Please Read.
AC10
- You will need a USB-RS485 Serial converter or the dedicated 1002-00-00 module.
  - The dedicated 1002-00-00 module for the AC10 is recommended. Can be purchased from a local distributor/integrator
    - AC10 using the dedicated 1002-00-00 module with DSELite
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885
    - AC10 using a generic RS485 device with DSELite

LINKnet Systems or Firewire Systems

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
- All Diagnostic & Maintenance Functions
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects
- All diagnostic & Maintenance Functions, Create new Projects &/or add Modules

Firewire is programmed through the 890 drive itself.

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or the much more advanced PDD (Parker Drive Development). To use DSELite you must flash the firmware.

You will not be able to use Profibus option in DSELite. If you are using Profibus, you require PDQ or PDD.

For the PDQ software you will likely use, see the link at the top of this FAQ page for download.
- Used out of the box for all AC30 drives
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
- Ensure your IP address on the PC has the same subnet as the base AC30.
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive.
- If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install AC30 Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects
DSI3 is used with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and used for version 2 projects.

LINK Systems

The CM351909 cable is also used to communicate with a LINK techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions, Create new Projects &/or add Modules
What is DSD and LINK

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Tue, 07 Apr 2020 18:47:13 GMT

Revision 33 posted to Electromechanical Knowledge Base by Jack DeGrano on 4/7/2020 6:47:13 PM

Cables

Both of these cables can be purchased through your local Parker Distributor or Integrator. See the following sections to determine what cable is required to communicate to your drive.

CM351909 has, on one end, an "RJ" connector that connects into the drive. The other end terminates into an RS232 connector via a provided RJ to Serial converter.
- If your computer/laptop does not have a serial port you will need to supply your own USB-to-Serial adapter. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chipsets will not work.
- ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)

CM471050 is a MiniUSB cable.
- It can be used to program LINKnet techboxes and communicate to an 890 drive

Standalone Drives

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

You can also "purchase" DSELite with part number DSE-LITE.
- The price for software + the cables under this part number is the same as buying the cables by itself (the software is still free, provided in the bundle).
- The cables that comes with "DSE-LITE" are the CM351909 cable.

590, 590+, 650, 650V, 650G or 690+:
- You will need the CM351909 programming cable
- 590+ Connect/Install/Extract with DSELite
- 690+ Connect/Install/Extract with DSELite
- 590C or 590D Connect/Install/Extract with DSELite [For 590+ product migration]

AC890
- You will need a MiniUSB cable. Parker offers part number CM471050.
- 890 Connect/Install/Extract with DSELite
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below. Please Read.
AC10
- You will need a USB-RS485 Serial converter or the dedicated 1002-00-00 module.
  - The dedicated 1002-00-00 module for the AC10 is recommended. Can be purchased from a local distributor/integrator
    - AC10 using the dedicated 1002-00-00 module with DSELite
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885
    - AC10 using a generic RS485 device with DSELite

LINKnet Systems or Firewire Systems

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
- All Diagnostic & Maintenance Functions
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects
- All diagnostic & Maintenance Functions, Create new Projects &/or add Modules

Firewire is programmed through the 890 drive itself.

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or the much more advanced PDD (Parker Drive Development). To use DSELite you must flash the firmware.

You will not be able to use Profibus option in DSELite. If you are using Profibus, you require PDQ or PDD.

For the PDQ software you will likely use, see the link at the top of this FAQ page for download.
- Used out of the box for all AC30 drives
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
- Ensure your IP address on the PC has the same subnet as the base AC30.
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive.
- If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install AC30 Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects
DSI3 is used with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and used for version 2 projects.

LINK Systems

The CM351909 cable is also used to communicate with a LINK techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions, Create new Projects &/or add Modules
What is DSD and LINK

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Tue, 07 Apr 2020 18:41:08 GMT

Revision 32 posted to Electromechanical Knowledge Base by Jack DeGrano on 4/7/2020 6:41:08 PM

Cables

Both of these cables can be purchased through your local Parker Distributor or Integrator. See the following sections to determine what cable is required to communicate to your drive.

CM351909 has, on one end, an "RJ" connector that connects into the drive. The other end terminates into an RS232 connector via a provided RJ to Serial converter.
- If your computer/laptop does not have a serial port you will need to supply your own USB-to-Serial adapter. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chipsets will not work.
- ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)

CM471050 is a MiniUSB cable.
- It can be used to program LINKnet techboxes and communicate to an 890 drive

Standalone Drives

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

You can also "purchase" DSELite with part number DSE-LITE.
- The price for software + the cables under this part number is the same as buying the cables by itself (the software is still free, provided in the bundle).
- The cables that comes with "DSE-LITE" are the CM351909 cable.

590, 590+, 650, 650V, 650G or 690+:
- You will need the CM351909 programming cable

AC890
- You will need a MiniUSB cable. Parker offers part number CM471050.
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below.
AC10
- You will need a USB-RS485 Serial converter or the dedicated 1002-00-00 module.
  - The dedicated 1002-00-00 module for the AC10 is recommended. Can be purchased from a local distributor/integrator.
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885

Using DSELite. How-To Install and Extract Configurations for the:

LINKnet Systems or Firewire Systems

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
- All Diagnostic & Maintenance Functions
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects
- All diagnostic & Maintenance Functions, Create new Projects &/or add Modules

Firewire is programmed through the 890 drive itself.

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or the much more advanced PDD (Parker Drive Development). To use DSELite you must flash the firmware.

You will not be able to use Profibus option in DSELite. If you are using Profibus, you require PDQ or PDD.

For the PDQ software you will likely use, see the link at the top of this FAQ page for download.
- Used out of the box for all AC30 drives
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
- Ensure your IP address on the PC has the same subnet as the base AC30.
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive.
- If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install AC30 Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects
DSI3 is used with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and used for version 2 projects.

LINK Systems

The CM351909 cable is also used to communicate with a LINK techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions, Create new Projects &/or add Modules
What is DSD and LINK

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Fri, 28 Feb 2020 22:17:41 GMT

Revision 31 posted to Electromechanical Knowledge Base by Jack DeGrano on 2/28/2020 10:17:41 PM

Cables

Both of these cables can be purchased through your local Parker Distributor or Integrator. See the following sections to determine what cable is required to communicate to your drive.

CM351909 has, on one end, an "RJ" connector that connects into the drive. The other end terminates into an RS232 connector via a provided RJ to Serial converter.
- If your computer/laptop does not have a serial port you will need to supply your own USB-to-Serial adapter. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chipsets will not work.
- ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)

CM471050 is a MiniUSB cable.
- It can be used to program LINKnet techboxes and communicate to an 890 drive

Standalone Drives

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

You can also "purchase" DSELite with part number DSE-LITE.
- The price for software + the cables under this part number is the same as buying the cables by itself (the software is still free, provided in the bundle).
- The cables that comes with "DSE-LITE" are the CM351909 cable.

590, 590+, 650, 650V, 650G or 690+:
- You will need the CM351909 programming cable

AC890
- You will need a MiniUSB cable. Parker offers part number CM471050.
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below.
AC10
- You will need a USB-RS485 Serial converter or the dedicated 1002-00-00 module.
  - The dedicated 1002-00-00 module for the AC10 is recommended. Can be purchased from a local distributor/integrator.
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885

Using DSELite. How-To Install and Extract Configurations for the:

LINKnet Techboxes, or AC890 Drives in a Firewire Network

To program LINKnet techboxes, or 890 drives networked together via Firewire you will need to use DSE (also know as DSE890) software. This can be purchased through a local distributor using either part number:

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
- All Diagnostic & Maintenance Functions
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects
- All diagnostic & Maintenance Functions, Create new Projects &/or add Modules

You will need a MiniUSB cable to program the LINKnet techbox initially. Parker offers part number CM471050 which can be used. You will be able to program through the Ethernet port via a Cat 6 shielded cable per the LINKnet manual across the network (ie. through a switch), once the techbox is initially programmed with an IP address via USB.

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or the much more advanced PDD (Parker Drive Development). To use DSELite you must flash the firmware.

You will not be able to use Profibus option in DSELite. If you are using Profibus, you require PDQ or PDD.

For the PDQ software you will likely use, see the link at the top of this FAQ page for download.
- Used out of the box for all AC30 drives
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
- Ensure your IP address on the PC has the same subnet as the base AC30.
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive.
- If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install AC30 Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects
DSI3 is used with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and used for version 2 projects.

LINK Systems

The CM351909 cable is also used to communicate with a LINK techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions, Create new Projects &/or add Modules
What is DSD and LINK

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Wed, 08 Jan 2020 18:39:55 GMT

Revision 30 posted to Electromechanical Knowledge Base by Jack DeGrano on 1/8/2020 6:39:55 PM

Cables

Both of these cables can be purchased through your local Parker Distributor or Integrator. See the following sections to determine what cable is required to communicate to your drive.

CM351909 has, on one end, an "RJ" connector that connects into the drive. The other end terminates into an RS232 connector via a provided RJ to Serial converter.
- If your computer/laptop does not have a serial port you will need to supply your own USB-to-Serial adapter. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chipsets will not work.
- ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)

CM471050 is a MiniUSB cable.
- It can be used to program LINKnet techboxes and communicate to an 890 drive

Standalone Drives

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

You can also "purchase" DSELite with part number DSE-LITE.
- The price for software + the cables under this part number is the same as buying the cables by itself (the software is still free, provided in the bundle).
- The cables that comes with "DSE-LITE" are the CM351909 cable.

590, 590+, 650, 650V, 650G or 690+:
- You will need the CM351909 programming cable

AC890
- You will need a MiniUSB cable. Parker offers part number CM471050.
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below.
AC10
- You will need a USB-RS485 Serial converter or the dedicated 1002-00-00 module.
  - The dedicated 1002-00-00 module for the AC10 is recommended. Can be purchased from a local distributor/integrator.
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885

Using DSELite. How-To Install and Extract Configurations for the:

LINKnet Techboxes, or AC890 Drives in a Firewire Network

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
- All Diagnostic & Maintenance Functions
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects
- All diagnostic & Maintenance Functions, Create new Projects &/or add Modules

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or the much more advanced PDD (Parker Drive Development). To use DSELite you must flash the firmware.

You will not be able to use Profibus option in DSELite. If you are using Profibus, you require PDQ or PDD.

For the PDQ software you will likely use, see the link at the top of this FAQ page for download.
- Used out of the box for all AC30 drives
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
- Ensure your IP address on the PC has the same subnet as the base AC30.
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive.
- If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install AC30 Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects
DSI3 is used with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and used for version 2 projects.

LINK Systems

The CM351909 cable is also used to communicate with a LINK techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions, Create new Projects &/or add Modules

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Tue, 07 Jan 2020 17:21:33 GMT

Revision 29 posted to Electromechanical Knowledge Base by Jack DeGrano on 1/7/2020 5:21:33 PM

Cables

Both of these cables can be purchased through your local Parker Distributor or Integrator. See the following sections to determine what cable is required to communicate to your drive.

CM351909 has, on one end, an "RJ" connector that connects into the drive. The other end terminates into an RS232 connector via a provided RJ to Serial converter.
- If your computer/laptop does not have a serial port you will need to supply your own USB-to-Serial adapter. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chipsets will not work.
- ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)

CM471050 is a MiniUSB cable.
- It can be used to program LINKnet techboxes and communicate to an 890 drive

Standalone Drives

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

You can also "purchase" DSELite with part number DSE-LITE.
- The price for software + the cables under this part number is the same as buying the cables by itself (the software is still free, provided in the bundle).
- The cables that comes with "DSE-LITE" are the CM351909 cable.

590, 590+, 650, 650V, 650G or 690+:
- You will need the CM351909 programming cable

AC890
- You will need a MiniUSB cable. Parker offers part number CM471050.
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below.
AC10
- You will need a USB-RS485 Serial converter or the dedicated 1002-00-00 module.
  - The dedicated 1002-00-00 module for the AC10 is recommended. Can be purchased from a local distributor/integrator.
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885

Using DSELite. How-To Install and Extract Configurations for the:

LINKnet Techboxes, or AC890 Drives in a Firewire Network

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
- All Diagnostic & Maintenance Functions
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects
- All diagnostic & Maintenance Functions, Create new Projects &/or add Modules

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or the much more advanced PDD (Parker Drive Development). To use DSELite you must flash the firmware.

You will not be able to use Profibus option in DSELite. If you are using Profibus, you require PDQ or PDD.

For the PDQ software you will like use, then see the link at the top of this FAQ page.
- Used out of the box for all AC30 drives
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive.
- If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install AC30 Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects
DSI3 is used with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and used for version 2 projects.

LINK Systems

The CM351909 cable is also used to communicate with a LINK techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions, Create new Projects &/or add Modules

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Tue, 07 Jan 2020 17:20:20 GMT

Revision 28 posted to Electromechanical Knowledge Base by Jack DeGrano on 1/7/2020 5:20:20 PM

Cables

Both of these cables can be purchased through your local Parker Distributor or Integrator. See the following sections to determine what cable is required to communicate to your drive.

CM351909 has, on one end, an "RJ" connector that connects into the drive. The other end terminates into an RS232 connector via a provided RJ to Serial converter.
- If your computer/laptop does not have a serial port you will need to supply your own USB-to-Serial adapter. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chipsets will not work.
- ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)

CM471050 is a MiniUSB cable.
- It can be used to program LINKnet techboxes and communicate to an 890 drive

Standalone Drives

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

You can also "purchase" DSELite with part number DSE-LITE.
- The price for software + the cables under this part number is the same as buying the cables by itself (the software is still free, provided in the bundle).
- The cables that comes with "DSE-LITE" are the CM351909 cable.

590, 590+, 650, 650V, 650G or 690+:
- You will need the CM351909 programming cable

AC890
- You will need a MiniUSB cable. Parker offers part number CM471050.
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below.
AC10
- You will need a USB-RS485 Serial converter or the dedicated 1002-00-00 module.
  - The dedicated 1002-00-00 module for the AC10 is recommended. Can be purchased from a local distributor/integrator.
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885

Using DSELite. How-To Install and Extract Configurations for the:

LINKnet Techboxes, or AC890 Drives in a Firewire Network

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
- All Diagnostic & Maintenance Functions
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects
- All diagnostic & Maintenance Functions, Create new Projects &/or add Modules

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or the much more advanced PDD (Parker Drive Development). To use DSELite you must flash the firmware.

You will not be able to use Profibus option in DSELite. If you are using Profibus, you require PDQ or PDD.

For the PDQ software you will like use, then see the link at the top of this FAQ page.
- Used out of the box for all AC30 drives
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive.
- If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install AC30 Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects
DSI3 is used with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and used for version 2 projects.

LINK Systems

The CM351909 cable is also used to communicate with a LINK techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions, Create new Projects &/or add Modules

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Fri, 20 Dec 2019 17:50:48 GMT

Revision 27 posted to Electromechanical Knowledge Base by Jack DeGrano on 12/20/2019 5:50:48 PM

Cables

Both of these cables can be purchased through your local Parker Distributor or Integrator. See the following sections to determine what cable is required to communicate to your drive.

CM351909 has, on one end, an "RJ" connector that connects into the drive. The other end terminates into an RS232 connector via a provided RJ to Serial converter.
- If your computer/laptop does not have a serial port you will need to supply your own USB-to-Serial adapter. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chipsets will not work.
- ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)

CM471050 is a MiniUSB cable.
- It can be used to program LINKnet techboxes and communicate to an 890 drive

Standalone Drives

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

You can also "purchase" DSELite with part number DSE-LITE.
- The price for software + the cables under this part number is the same as buying the cables by itself (the software is still free, provided in the bundle).
- The cables that comes with "DSE-LITE" are the CM351909 cable.

590, 590+, 650, 650V, 650G or 690+:
- You will need the CM351909 programming cable

AC890
- You will need a MiniUSB cable. Parker offers part number CM471050.
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below.
AC10
- You will need a USB-RS485 Serial converter or the dedicated 1002-00-00 module.
  - The dedicated 1002-00-00 module for the AC10 is recommended. Can be purchased from a local distributor/integrator.
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885

Using DSELite. How-To Install and Extract Configurations for the:

LINKnet Techboxes, or AC890 Drives in a Firewire Network

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
- All Diagnostic & Maintenance Functions
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects
- All diagnostic & Maintenance Functions, Create new Projects &/or add Modules

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or the much more advanced PDD (Parker Drive Development). To use DSELite you must flash the firmware.

You will not be able to use Profibus option in DSELite. If you are using Profibus, you require PDQ or PDD.

For the PDQ software you will like use, then see the link at the top of this FAQ page.
- Used out of the box for all AC30 drives
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive.
- If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install AC30 Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects
DSI3 is used with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and used for version 2 projects.

LINK Systems

The CM351909 cable is also used to communicate with a LINK techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions, Create new Projects &/or add Modules

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Fri, 20 Dec 2019 17:49:56 GMT

Revision 26 posted to Electromechanical Knowledge Base by Jack DeGrano on 12/20/2019 5:49:56 PM

Cables

Both of these cables can be purchased through your local Parker Distributor or Integrator. See the following sections to determine what cable is required to communicate to your drive.

CM351909 has, on one end, an "RJ" connector that connects into the drive. The other end terminates into an RS232 connector via a provided RJ to Serial converter.
- If your computer/laptop does not have a serial port you will need to supply your own USB-to-Serial adapter. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chipsets will not work.
- ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)

CM471050 is a MiniUSB cable.
- It can be used to program LINKnet techboxes and communicate to an 890 drive

Standalone Drives

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

You can also "purchase" DSELite with part number DSE-LITE.
- The price for software + the cables under this part number is the same as buying the cables by itself (the software is still free, provided in the bundle).
- The cables that comes with "DSE-LITE" are the CM351909 cable.

590, 590+, 650, 650V, 650G or 690+:
- You will need the CM351909 programming cable

AC890
- You will need a MiniUSB cable. Parker offers part number CM471050.
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below.
AC10
- You will need a USB-RS485 Serial converter or the dedicated 1002-00-00 module.
  - The dedicated 1002-00-00 module for the AC10 is recommended. Can be purchased from a local distributor/integrator.
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885

Using DSELite. How-To Install and Extract Configurations for the:

LINKnet Techboxes, or AC890 Drives in a Firewire Network

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
- All Diagnostic & Maintenance Functions
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects
- All diagnostic & Maintenance Functions, Create new Projects &/or add Modules

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or the much more advanced PDD (Parker Drive Development). To use DSELite you must flash the firmware.

You will not be able to use Profibus option in DSELite. If you are using Profibus, you require PDQ or PDD.

For the PDQ software you will like use, then see the link at the top of this FAQ page.
- Used out of the box for all AC30 drives
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive.
- If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install AC30 Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects while DSI3 is compatible with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and version 2 projects.

LINK Systems

The CM351909 cable is also used to communicate with a LINK techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions, Create new Projects &/or add Modules

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Fri, 20 Dec 2019 17:46:53 GMT

Revision 25 posted to Electromechanical Knowledge Base by Jack DeGrano on 12/20/2019 5:46:53 PM

Cables

Both of these cables can be purchased through your local Parker Distributor or Integrator. See the following sections to determine what cable is required to communicate to your drive.

CM351909 has, on one end, an "RJ" connector that connects into the drive. The other end terminates into an RS232 connector via a provided RJ to Serial converter.
- If your computer/laptop does not have a serial port you will need to supply your own USB-to-Serial adapter. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chipsets will not work.
- ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)

CM471050 is a MiniUSB cable.
- It can be used to program LINKnet techboxes and communicate to an 890 drive

Standalone Drives

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

You can also "purchase" DSELite with part number DSE-LITE.
- The price for software + the cables under this part number is the same as buying the cables by itself (the software is still free, provided in the bundle).
- The cables that comes with "DSE-LITE" are the CM351909 cable.

590, 590+, 650, 650V, 650G or 690+:
- You will need the CM351909 programming cable

AC890
- You will need a MiniUSB cable. Parker offers part number CM471050.
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below.
AC10
- You will need a USB-RS485 Serial converter or the dedicated 1002-00-00 module.
  - The dedicated 1002-00-00 module for the AC10 is recommended. Can be purchased from a local distributor/integrator.
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885

Using DSELite. How-To Install and Extract Configurations for the:

LINKnet Techboxes, or AC890 Drives in a Firewire Network

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
- All Diagnostic & Maintenance Functions
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects
- All diagnostic & Maintenance Functions, Create new Projects &/or add Modules

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or the much more advanced PDD (Parker Drive Development). To use DSELite you must flash the firmware.

You will not be able to use Profibus option in DSELite. If you are using Profibus, you require PDQ or PDD.

For the PDQ software you will like use, then see the link at the top of this FAQ page.
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
- Used out of the box for all AC30s
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive. If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects while DSI3 is compatible with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and version 2 projects.

LINK Systems

The CM351909 cable is also used to communicate with a LINK techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions, Create new Projects &/or add Modules

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Mon, 16 Dec 2019 20:20:50 GMT

Revision 24 posted to Electromechanical Knowledge Base by Jack DeGrano on 12/16/2019 8:20:50 PM

Cables

Both of these cables can be purchased through your local Parker Distributor or Integrator. See the following sections to determine what cable is required to communicate to your drive.

CM351909 has, on one end, an "RJ" connector that connects into the drive. The other end terminates into an RS232 connector via a provided RJ to Serial converter.
- If your computer/laptop does not have a serial port you will need to supply your own USB-to-Serial adapter. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chipsets will not work.
- ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)

CM471050 is a MiniUSB cable.
- It can be used to program LINKnet techboxes and communicate to an 890 drive

Standalone Drives

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

You can also "purchase" DSELite with part number DSE-LITE.
- The price for software + the cables under this part number is the same as buying the cables by itself (the software is still free, provided in the bundle).
- The cables that comes with "DSE-LITE" are the CM351909 & CM471050 cables.

590, 590+, 650, 650V, 650G or 690+:
- You will need the CM351909 programming cable

AC890
- You will need a MiniUSB cable. Parker offers part number CM471050.
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below.
AC10
- You will need a USB-RS485 Serial converter or the dedicated 1002-00-00 module.
  - The dedicated 1002-00-00 module for the AC10 is recommended. Can be purchased from a local distributor/integrator.
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885

Using DSELite. How-To Install and Extract Configurations for the:

LINKnet Techboxes, or AC890 Drives in a Firewire Network

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
- All Diagnostic & Maintenance Functions
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects
- All diagnostic & Maintenance Functions, Create new Projects &/or add Modules

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or the much more advanced PDD (Parker Drive Development). To use DSELite you must flash the firmware.

You will not be able to use Profibus option in DSELite. If you are using Profibus, you require PDQ or PDD.

For the PDQ software you will like use, then see the link at the top of this FAQ page.
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
- Used out of the box for all AC30s
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive. If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects while DSI3 is compatible with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and version 2 projects.

LINK Systems

The CM351909 cable is also used to communicate with a LINK techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects. -- (CM351909 comes included)
- All Diagnostic & Maintenance Functions, Create new Projects &/or add Modules

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Mon, 16 Dec 2019 19:21:33 GMT

Revision 23 posted to Electromechanical Knowledge Base by Jack DeGrano on 12/16/2019 7:21:33 PM

Standalone Drives

To program standalone drives you will use DSE Lite. If you are using an AC30 out of the box, you will need PDQ. Both can be downloaded from the following link:

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

590, 590+, 650, 650V, 650G or 690+:
- You will need a CM351909 programming cable which can be purchased through your local distributor.
- It is important to note that the CM351909 programming cable will terminate to a serial port. If your computer/laptop does not have a serial port you will need a USB-to-Serial adaptor. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chipsets will not work.
  - ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)
AC890
- You will need a MiniUSB cable. Parker offers part number CM471050 which can be used, and purchased through a local distributor.
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below.
AC10
- You will need a USB-RS485 Serial converter.
  - The dedicated 1002-00-00 cloning module and RS485 converter for the AC10 is recommended. Can be purchased from a local distributor/integrator.
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885

You can also "purchase" DSELite with part number DSE-LITE.
- The price for software + the cables under this part number, is the same as buying the cables by itself (the software is still free, it will come with the bundle).
- The cables that comes with "DSE-LITE" are the CM351909 + CM471050

LINKnet Techboxes, or AC890 Drives in a Firewire Network

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects

How-To Install and Extract Configurations for the:

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or the much more advanced PDD (Parker Drive Development). To use DSELite you must flash the firmware.

You will not be able to use Profibus option in DSELite. If you are using Profibus, you require PDQ or PDD.

For the PDQ software you will like use, then see the link at the top of this FAQ page.
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
- Used out of the box for all AC30s
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive. If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects while DSI3 is compatible with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and version 2 projects.

LINK Systems

The CM351909 cable can also be used to communicate with a LINK techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc.
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects.

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Tue, 10 Dec 2019 18:43:40 GMT

Revision 22 posted to Electromechanical Knowledge Base by Jack DeGrano on 12/10/2019 6:43:40 PM

Standalone Drives

To program standalone drives you will use DSE Lite. If you are using an AC30 out of the box, you will need PDQ. Both can be downloaded from the following link:

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

590, 590+, 650, 650V, 650G or 690+:
- You will need a CM351909 programming cable which can be purchased through your local distributor.
- It is important to note that the CM351909 programming cable will terminate to a serial port. If your computer/laptop does not have a serial port you will need a USB-to-Serial adaptor. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chipsets will not work.
  - ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)
AC890
- You will need a MiniUSB cable. Parker offers part number CM471050 which can be used, and purchased through a local distributor.
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below.
AC10
- You will need a USB-RS485 Serial converter.
  - The dedicated 1002-00-00 cloning module and RS485 converter for the AC10 is recommended. Can be purchased from a local distributor/integrator.
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885

LINKnet Techboxes, or AC890 Drives in a Firewire Network

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects

How-To Install and Extract Configurations for the:

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or the much more advanced PDD (Parker Drive Development). To use DSELite you must flash the firmware.

You will not be able to use Profibus option in DSELite. If you are using Profibus, you require PDQ or PDD.

For the PDQ software you will like use, then see the link at the top of this FAQ page.
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
- Used out of the box for all AC30s
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive. If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects while DSI3 is compatible with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and version 2 projects.

LINK Systems

The CM351909 cable can also be used to communicate with a LINK techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc.
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects.

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Mon, 09 Dec 2019 17:57:46 GMT

Revision 21 posted to Electromechanical Knowledge Base by Jack DeGrano on 12/9/2019 5:57:46 PM

Standalone Drives

To program standalone drives you will use DSE Lite. If you are using an AC30 out of the box, you will need PDQ. Both can be downloaded from the following link:

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

590, 590+, 650, 650V, 650G or 690+:
- You will need a CM351909 programming cable which can be purchased through your local distributor.
- It is important to note that the CM351909 programming cable will terminate to a serial port. If your computer/laptop does not have a serial port you will need a USB-to-Serial adaptor. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chipsets will not work.
  - ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)
AC890
- You will need a MiniUSB cable. Parker offers part number CM471050 which can be used, and purchased through a local distributor.
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below.
AC10
- You will need a USB-RS485 Serial converter.
  - The dedicated 1002-00-00 cloning module and RS485 converter for the AC10 is recommended. Can be purchased from a local distributor/integrator.
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885

LINKnet Techboxes, or AC890 Drives in a Firewire Network

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects

How-To Install and Extract Configurations for the:

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or PDD (Parker Drive Development). To use DSELite you must flash the firmware.

For the PDQ software see the link at the top of this FAQ page.
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
- Used out of the box for all AC30s
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive. If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects while DSI3 is compatible with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and version 2 projects.

LINK Systems

The CM351909 cable can also be used to communicate with a LINK techbox.

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc.
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects.

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590

What software and communication cable are used for programming?

Jack DeGrano — Mon, 11 Nov 2019 23:25:18 GMT

Revision 20 posted to Electromechanical Knowledge Base by Jack DeGrano on 11/11/2019 11:25:18 PM

Standalone Drives

To program standalone drives you will use DSE Lite. If you are using an AC30 out of the box, you will need PDQ. Both can be downloaded from the following link:

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

590, 590+, 650, 650V, 650G or 690+:
- You will need a CM351909 programming cable which can be purchased through your local distributor.
- It is important to note that the CM351909 programming cable will terminate to a serial port. If your computer/laptop does not have a serial port you will need a USB-to-Serial adaptor. We recommend FTDI chip based adapters or the serial adapter linked below. Prolific chips will not work.
  - ATEN (model UC232A), IOGEAR (model GUC232A), SEWELL (model SW-1301)
AC890
- You will need a MiniUSB cable, part number CM471050 which can be purchased through a local distributor.
AC30
- You will need a standard CAT5 or CAT6 ethernet cable.
- Additional information in the AC30 subsection below.
AC10
- You will need a USB-RS485 Serial converter.
  - The dedicated 1002-00-00 cloning module and RS485 converter for the AC10 is recommended. Can be purchased from a local distributor/integrator.
  - If using a basic USB – RS485 Converter we recommend US Converters' Part Number XS885

LINKnet Techboxes, or AC890 Drives in a Firewire Network

8906/DSERUN/00 is just the runtime version of the software which will only allow you to upload and download programs
8906/DSEDEV/00 will give you all the functionality of the runtime version plus the ability to program the projects

How-To Install and Extract Configurations for the:

Software Summary Matrix

community.parker.com/.../0_5F00_Parker-SW-matrix.xlsx

AC30 Software

Out of the box, the AC30 uses PDQ (Parker Drive Quicktool) or PDD (Parker Drive Development). To use DSELite you must flash the firmware.

For the PDQ software see the link at the top of this FAQ page.
- A standalone software package based on Codesys - utilizing function chart based aspects of Codesys (very similar to DSELite)
- Used out of the box for all AC30s
For PDD see the associated FAQ for install/update instructions, and connecting to the AC30 in the PAM environment.
- A software package integrated into the Parker Automation Manager software (to utilize full PLC functionalities in a Codesys coding environment)
- A version comes standard with PAM1.4
For DSELite, if you want or have a LinkNet AC30 you must connect with DSELite to interface with the drive. If your AC30 has two versions of firmware located on the 3rd line down on the main menu of the keypad, you have a LinkNet firmware drive and it requires DSELite.
- If you want LinkNet, follow the Help file in DSELite to connect to the drive and do a Command -> Install Firmware.

TS8000 HMIs

http://divapps.parker.com/divapps/eme/EME/downloads/AC_DC_Drives_Software.htm

DSI8000 is used with version 1 projects while DSI3 is compatible with the TS8006/00/00, TS8008/00/02, TS8010/00/02, and TS8015/00/00 only and version 2 projects.

LINK Systems

DSD-RUN is just the runtime version of the software which will allow you to upload and download programs onto LINK Techboxes, LINK Racks, etc.
DSD-DEV will give you all the functionality of DSD-RUN plus the ability to program the projects.

14JUN2016 LS

8/29/2018 SV

20Jul19 JD

Tags: DSELite, dse890, DSE, TS8000, AC10, AC30, 590+, DSD, 690+, 890, 590