- Typically the configuration is accomplished via the keypad and consulting the manual for parameter definitions. The Quickstart guide is useful for calling out the minimum information required to move a motor during initial setup.
- However, programming via DSELite is also available
- The programming connection is a 2-wire RS485 to the terminal strip (A+ and B-) and requires a USB to RS485 converter. Consult the FAQs in the sidebar for connecting to the drive using RS485 and DSELite, and the recommended USB to RS485 converter.
[QuickLink for the AC10 on Parker.com] - Manual, QuickStarts, Product Support, etc