The P Series Drive's control board dissipates roughly 25 W while powered on. The control power terminals on the P Series Drive, C1 and C2, draw approximately 208 mA at 120 VAC and approximately 104 mA at 240 VAC. The difference in control power current draw between different P Series drives is negligible.
Inrush current will be present on the terminals at power-up. Because of this, a 3 A time delay fuse is recommended for C1 and C2.
Applicable model numbers: PD-04P, PD-10P, PD-35P, PD-04C, PD-10C, PD-35C