Follow Parker Hannifin on social media:
The following part numbers are impacted:
(xx equals any valid option for these models)
All custom products based on the above products
The Compax3 has been available with three different Feedback option codes:
F10 - Standard resolver feedback supportF11 - SinCos© (Hiperface)F12 - Quadrature encoder, 1Vpp sinecosine, Endat 2.1
As of July 1, 2018, the new options will be as follows:F10 - Standard resolver feedback support & SinCos© (Hiperface)F12 - Quadrature encoder, 1Vpp sinecosine, Endat 2.1
The F11 option code will be disabled effective immediately. F10 option code is a direct replacement.
No changes need in terms of the configuration file in the C3 ServoManager software, firmware within the drive, cable or motor.
In all cases the F11 can be replaced by the F10 option. For example, model number
S025V2F11I31T11M00 should now be ordered as S025V2F10I31T11M00
Customers with existing Compax3 project files for F11 models can download the files directly to F10 drives without modification. In new applications that require SinCos© (Hiperface) feedback, user can simply select F11 in the device selection wizard when configuring the drive. This will allow the user to configure the drive for a motor with SinCos© (Hiperface) feedback.
This simplifies the ordering to only 2 feedback options F10 or F12.