The P Series drive can be run on three phase or single phase 230 VAC input power. In most cases, the drive has the same current rating running on single phase as it does running on three phase. However, in the case of the PD-35P and PD-35C, the peak current is derated by 50% when running on single phase. The table below shows all power types and ratings for which P Series drives are suitable.
|Drive||240/230/208 VAC 3 PH||240/230/208 VAC 1 PH||120 VAC 1 PH||24-80 VDC|
Note that the PD-10x and PD-35x MUST be used with 240/230/208 VAC. Running either of these drives on a lower voltage can damage them.
[Quick link: P Series product page (North America)]