If you have a flash card reader installed on your computer, you can download your application to the flash disk with the following setup in Machine Shop.
1) With Machine Shop open, click TRANSFER, then select ADD CONNECTION.
2) Call the connection whatever you want, select DISK in the CONNECTION TYPE drop-down menu and click OK.
3) Select the drive that the flash card reader resides at on the computer with the drop-down window and click FINISH.
Whenever you are ready to download your modified application to the flash disk, power down the CTC panel, remove the flash card and place it in the reader. Then go to TRANFER and select DOWNLOAD. Then click the DOWNLOAD button in the resulting window.