Home Technologies Hydraulics Forum Information on :Legacy VDSP 20 D 29

Hydraulics

Forum Information on :Legacy VDSP 20 D 29

Hydraulics requires membership for participation - click to join

Date Derek Alex
Date 24 Oct 2018 2:43 AM
Replies 3 replies
Subscribers 3 subscribers
Views 9206 views
Users 0 members are here

Forum Links

Related

Print Friendly and PDF

Information on :Legacy VDSP 20 D 29

By Derek Alex over 3 years ago

Hi folks,

Does anyone have a data sheet or wiring diagram for this product.

I'd estimate that it must be 20 years old approximately.

It functions mechanically, the wiring simply needs to be replaced.

Thanks

Parents

Derek Alex over 3 years ago

Hi folks,

during the disassembly of the wiring harness, I discovered that the VDSP 20D29 is fully mechanical.

It includes a bracket for a position switch in order to supply power to the motor, however, the valve itself has no electrical components.

A spec sheet would be very interesting if someone has one.

Thanks
Cancel
Up 0 Down

Reply

Cancel
Wendy Soucie, Employee over 3 years ago in reply to Derek Alex

VDSP20 was transferred to Parker Germany in 1980. This was available with 1 to 3 spools. It was rated to 10 GPM and 3000PSI. Parker Germany (in Cologne at the time) sold the rights to Log Hydraulic in West German, which is now Weber Hyd.

Please refer to the link below for contact information: https://www.weber-hydraulik.com/en/homepage/
Cancel
Up 0 Down

Reply

Cancel

Reply

Wendy Soucie, Employee over 3 years ago in reply to Derek Alex

VDSP20 was transferred to Parker Germany in 1980. This was available with 1 to 3 spools. It was rated to 10 GPM and 3000PSI. Parker Germany (in Cologne at the time) sold the rights to Log Hydraulic in West German, which is now Weber Hyd.

Please refer to the link below for contact information: https://www.weber-hydraulik.com/en/homepage/
Cancel
Up 0 Down

Reply

Cancel

Children

tetrahidrolik@gmail.com 4 months ago in reply to Wendy Soucie

I was looking for this too, thanks
I wrote it after a long time, but I wanted to say thank you.
Cancel
Up 0 Down

Reply

Cancel